Why Choose TPU 90A?
TPU 90A is a flexible engineering thermoplastic that combines elasticity with strength and excellent wear resistance. Its Shore 90A hardness provides structural support while allowing components to bend, compress, and flex repeatedly.
This material is ideal for protective parts, flexible connectors, cushioning components, and wear-resistant applications where rigid plastics may crack or fail.
3D printing technology
Maximum print size
256 × 256 × 256 mm (10.1" × 10.1" × 10.1")


TPU 90A combines flexibility, strength, and excellent wear resistance for components exposed to repeated movement, bending, and mechanical stress. Its balance of elasticity and structural support makes it a practical material for demanding industrial and functional applications.
From protective covers and flexible connectors to cushioning components and wear-resistant parts, TPU 90A provides a versatile alternative to rigid plastics. FDM printing enables custom shapes and application-specific designs without conventional molds or tooling.
Key Benefits
-
Flexible and Elastic – Bends and compresses while maintaining structural support.
-
Excellent Wear Resistance – Designed for repeated movement and abrasive contact.
-
High Elongation – Stretches more than 650% in the X-Y direction before breaking under published test conditions.
-
Impact Resistant – Absorbs mechanical forces that may damage rigid components.
-
Oil and Grease Resistant – Resistant to most oils and greases, making it useful for selected industrial applications.
Applications
-
Seals and Gaskets – Flexible components that compress to accommodate mating surfaces.
-
Protective Covers and Sleeves – Custom components that cushion contact and protect equipment.
-
Flexible Connectors and Joints – Parts designed to accommodate movement and repeated bending.
-
Cushioning and Impact-Absorbing Parts – Protective pads, bumpers, and shock-absorbing components.
-
Wear-Resistant Components – Parts designed for repeated contact and mechanical movement.
Technical Specifications
Shore Hardness
90A
Density
1.24 g/cm³
Tensile Strength
12.5 ± 0.8 MPa (X-Y)
10.1 ± 0.6 MPa (Z)
Young's Modulus
5.3 ± 0.7 MPa (X-Y)
4.4 ± 0.6 MPa (Z)
Elongation at Break
>650% (X-Y)
>350% (Z)
Impact Strength
124.2 kJ/m² (X-Y)
87.3 kJ/m² (Z)
Melting Temperature
180°C
Water Absorption (25°C, 55% RH)
0.61%
Note: Mechanical properties vary with print orientation, geometry, processing conditions, and infill density.

Produce durable, cost-effective parts using Fused Deposition Modeling (FDM). Known for its versatility and broad material selection, FDM is well suited for functional prototypes, fixtures, and low-volume components where strength, speed, and efficiency matter.
Design Guidelines
Minimum wall thickness
≥ 1.0 mm
Unsupported overhangs
≤ 45° from horizontal
Bridge length
≤ 10 mm for best results
Clearance (moving parts)
≥ 0.5 mm
Load orientation
Design loads along the X–Y plane
*Recommendations vary based on geometry and application. For full details, see the full FDM design guide.

